[. . . ] S1 IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. €¢ The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. €¢ The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. €¢ This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). €¢ Be careful of high temperatures in the surrounding area. When installing the monitor inside a housing, or if the ambient temperature may be outside of the range of 32ºF (0ºC) to 104ºF (40ºC), install a fan or take other measures to keep the ambient temperature within the required range. €¢ Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. €¢ Adhere to the following when installing the monitor in its vertical orientation. -  o install in horizontal orientation, rotate the monitor 90 T degrees to the right. ) -  e sure to secure the power cord (supplied) to the cable B clamp attachment below with the supplied cable clamp. Make sure that the power cord (supplied) does not supply power to the terminal when being secured and do not over bend the power cord (supplied). Power cord (Supplied) Cable clamp attachment Cable clamp • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. €¢ After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. €¢ Do not place the monitor on a device which generates heat. €¢ Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. For other instructions, refer to the instruction manuals in the “Manual” folder on the included CD-ROM. E 6 Supplied Components If any component should be missing, please contact your dealer. ρ¯ Liquid Crystal Display Monitor: 1  Cable clamp: 2  Power cord  CD-ROM (Utility Disk for Windows): 1  Operation manual: 1  Protection cover: 4  Handle screw (short): 4  Bezel sheet (long/short): 2 each  Bezel sheet attachment instructions: 1 ENGLISH * Sharp Corporation holds authorship rights to the Utility Disk program. [. . . ] Caution Handle Handle spacers • The handles, handle screws and handle spacers are for this monitor. €¢ When attaching the handles, always use this monitor’s handles, handle spacers, and handle screws. TIPS • To lower the height of the handles, attach the handles with the handle spacers removed. To attach the handles with the handle spacers removed, secure the handles with the included handle screws (short). [. . . ]